What regulations does DOT have for reflective tape?
Jerrytape DOT-C2 reflective tape,Reflective tape manufacturer in China
2026-05-09
×
What are the DOT regulations for reflective tape?
The DOT (Department of Transportation) regulations on reflective tape are mainly based on the FMVSS 108 standard, which applies to trailers and truck tractors with a total weight of ≥ 10000 pounds (approximately 4.5 tons) and a width of ≥ 80 inches (approximately 2 meters). Its purpose is to enhance the visibility of large vehicles at night or in low visibility conditions to prevent collision accidents.
DOT's requirements for reflective tape:
| Label | It must be clearly labeled with the certification words "DOT-C2", "DOT-C3", or "DOT-C4". |
| Object | Heavy duty trailer (after 1993), truck tractor (after 1997) |
| Pattern | Side/Lower Back: alternating red and white stripes; Rear upper part: white inverted "L" shaped contour marker |
| Location | At the designated height on the side and rear, and covering sufficient area. |
| Width standard | DOT-C2 ≥ 50mm; DOT-C3 ≥ 75mm； DOT-C4 ≥ 100mm |
| Body | All reflective tapes must be continuously laid according to rules to ensure completeness. |
| Dynamic | The proposed new regulations for 2025 plan to abolish the requirement for old vehicles to be equipped with reflective tape. |
Differences in DOT-C2/C3/C4 grades
DOT has classified three levels based on reflective intensity, with DOT-C2 being the most commonly used standard level:
• DOT-C2: Standard grade. Width ≥ 50mm, meets minimum reflective performance, suitable for the vast majority of commercial trailers.
• DOT-C3: High strength grade. Width ≥ 75mm, higher reflective brightness, suitable for harsh weather or scenes with high visibility requirements.
• DOT-C4: Super level. Width ≥ 100mm, providing the highest level of night visibility.
Installation Guide
• Sequential installation: For red/white alternating patterns, they must be laid out alternately according to the rules and cannot be arranged arbitrarily.
• Secure adhesion: Ensure that the reflective tape is firmly adhered to a thoroughly clean and dry surface.
• Regular inspection: Although there is no mandatory replacement cycle, the inspection of reflective tape must be included in the daily inspection of the fleet.
Our company not only produces Reflective Tape, but also Acrylic Foam Tape,Anti Slip Tape,Screen Repair Tape,Butyl Rubber Tape,Pavement Marking Tape, Glow In Dark Tape, etc,Looking forward to working with you.
recommended for you
no data
Get in touch with us
Copyright © 2026 Kunshan Jieyudeng Intelligent Technology Co.,ltd - www.jerrytapevideo.com |Sitemap | Privacy Policy