loading

Jerrytape - Professional custom tapes manufacturer & supplier to global tape brand wholesalers.

How to clean the surface of Photoluminescent Tape?

photoluminescent tape manufacturer China
×
How to clean the surface of Photoluminescent Tape?

How to clean the surface of Photoluminescent Tape?
 
The core principle for cleaning the surface of Photoluminescent Tape is to handle it gently and avoid using strong chemicals that may scratch the surface or damage the light storage layer. Wipe with a damp cloth and avoid strong acid and alkali solvents.
 
How to clean the surface of Photoluminescent Tape? 1
 
Cleaning method:
 
•  Daily gentle cleaning: For most dust and mild stains, the safest method is to use warm water with a small amount of neutral soap. Dip a soft cloth or sponge in it, gently wipe it, and finally wipe it clean with water and dry it off.
•  For oil stains or stubborn stains: If there are oil stains or stubborn stains on the surface, isopropanol (IPA) or diluted alcohol (such as a 50/50 alcohol aqueous solution) can be used for wiping.
•  Remove residual glue: You can first heat the residual glue with a hair dryer to soften it and make it easier to scrape off. For residual offset printing, cooking oil, baby oil, or alcohol can help dissolve it. Note that strong solvents such as acetone should be avoided unless it is confirmed that they will not damage the tape or adhesive surface.
 
How to clean the surface of Photoluminescent Tape? 2
 
Notes:
 
•  Avoid scratches: Do not use steel wire balls, hard brushes, or rough cloths, as this will leave scratches on the surface of the tape, affecting its appearance and transparency.
•  Caution when using chemicals: Avoid using cleaning agents containing ammonia, bleach, or strong acids or bases, as they may corrode the surface of the tape or damage its light storage performance.
•  Test first: Try the cleaning agent in an inconspicuous small corner to ensure that it will not cause fading or damage to the tape.
•  Regular inspection: It is recommended to clean at least once a year and increase the frequency according to the severity of the usage environment. At the same time, check whether the tape is worn or the luminous effect is weakened, and replace it if necessary.
 
How to clean the surface of Photoluminescent Tape? 3
 
Our company not only produces Glow in the Dark Tape, but also Cloth Duct Tape,Gaffer Tape, Acrylic Foam Tape,Anti Slip Tape,Reflective Tape,Butyl Rubber Tape,Pavement Marking Tape, etc,Looking forward to working with you.

prev
How is artificial turf tape fixed?
How to use luminous tape?
next
recommended for you
Get in touch with us
Contact us
whatsapp
Contact customer service
Contact us
whatsapp
cancel
Customer service
detect