How to use luminous tape?
Wholesale glow in the dark tape, Buy luminous tape China factory
2026-09-11
×
How to use luminous tape?
Luminous tape generally refers to luminescent tape that is not charged and emits light in the dark by absorbing light/sunlight.
Usage:
1. Clean the surface
Wipe the area to be pasted clean with alcohol or a damp cloth, ensuring it is dry, flat, free of oil stains and dust. Rough, dusty, and damp surfaces that do not adhere firmly.
2. Measurement cutting
Cut according to the required length. When pasting stairs or doorways, the corners can be cut into rounded corners to reduce warping. First, cut a small section to test the stickiness.
3. Tear off adhesive and paste
Tear off the backing paper, slowly apply it from one end, and flatten it with your hand or scraper while applying, trying to drive away any bubbles. You can make a small cut at the corner and then fold it up.
4. Press firmly
After pasting, press repeatedly, especially on the edges. It is best to let it sit for a few hours to 24 hours before applying force or stepping on it.
5. Use after charging
Illuminate with sunlight, flashlight, or indoor light for 10-30 minutes, and the light will turn off when turned off. In the future, every time there is light shining, it will accumulate light again. The brightness will gradually decrease over time.
6. Common posting methods
Can be affixed to the edges of stair treads, switches, door handles, corridors, emergency passages, toolboxes, bicycles, tent zippers, electrical buttons, and other locations. It is recommended to choose a non slip and wear-resistant type for flooring.
Notes:
• Do not stick it on high temperature, oil stains, rough paint peeling, or wet surfaces.
• Do not use ordinary luminous tape to replace fire emergency lights and regular evacuation instructions.
• When removing, you can use a hair dryer to heat it up, then slowly tear it off, and clean the remaining glue with alcohol or glue remover.
Frequently Asked Questions
Q: Does the tape need charging?
A: No battery needed. Absorb light for 10–30 minutes, then glow.
Q: How long does it glow?
A: Typically 4–12 hours, brightness fades gradually.
Q: Is it suitable for outdoor use?
A: Yes, waterproof and UV-resistant, ideal for outdoor marking.
Q: Can I customize size and printing?
A: Yes, OEM custom width, length, color and printed patterns available.
Q: Does the tape need charging?
A: No battery needed. Absorb light for 10–30 minutes, then glow.
Q: How long does it glow?
A: Typically 4–12 hours, brightness fades gradually.
Q: Is it suitable for outdoor use?
A: Yes, waterproof and UV-resistant, ideal for outdoor marking.
Q: Can I customize size and printing?
A: Yes, OEM custom width, length, color and printed patterns available.
Our company not only produces Glow In Dark Tape, but also Anti Slip Tape,Cloth Duct Tape, Gaffer Tape, Acrylic Foam Tape,Reflective Tape,Butyl Rubber Tape,Pavement Marking Tape, etc,Looking forward to working with you.
recommended for you
Get in touch with us
Copyright © 2026 Kunshan Jieyudeng Intelligent Technology Co.,ltd - www.jerrytapevideo.com |Sitemap | Privacy Policy