Jerrytape - Professional custom tapes manufacturer & supplier to global tape brand wholesalers.
| step | Key Operating Points | Precautions |
| 1. Clean the surface | Thoroughly wipe the hole and surrounding area with a damp cloth to remove dust and oil stains. | Make sure the surface is dry before sticking, otherwise it will affect the adhesion. |
| 2. Trim holes | Use scissors to trim the yarn that splits and curls at the edge of the hole neatly, making it regular in shape (such as circular or square). | The trimming range should be as small as possible, only the rough edges should be treated. |
| 3. Cutting and pasting | Cut the repair tape that is at least 2-3 centimeters larger than the area around the hole. Tear off the backing adhesive, align and paste from the indoor side, and press firmly for a few seconds. | The tape must completely cover the hole and leave enough margin, which is the key to repairing firmly. |
| 4. Check and reinforce | After pasting, check if the edges are tightly adhered. If there are bubbles, gently scrape them flat. For slightly larger holes, consider using the "cross cross method" to stick two layers of reinforcement. | Avoid pulling or getting wet with force within 24 hours after pasting. |
Contact: Amily Wu
Contact phone number: +86 18550339440
E-mail: amily@jerrytape.com
WhatsApp: +86 18550339440
Address: Building A8, Lumingjiuli E-Commerce Industrial Park, Wanyuan Road,Dianshanhu Town,Kunshan City,Jiangsu Province